Ginseal Carbon Packing (JSP-CB Series)

Ginseal Carbon Fiber Packing
Carbonized fiber packing is manufactured by heating polyacrylonitrile fiber into carbonized fiber. GINSEAL® Carbon fiber packing has two types as follows:

Carbonized PTFE Packing impregnated in Graphite
Item No.: JSP-CB10

Features
Carbon fiber packing with graphite is woven of strong carbon fiber after
Softening treatment and impregnation with mixture latex of fine
Graphite powder, PTFE dispersion and lubricant. It is chemical resistant,
Heat conductive and with high strength, so this item is widely used with
Revolving and reciprocating pumps in which chemical corrosive media
And particle grains exist. It's the best sealing material for high pressure
A, high temperature and corrosion.

Operating range
Max. Working temperature: -200 ~ +650 (STEAM)-200~+565 (ATMOSPHERE)
Max. Working pressure: 5 Mpa (rotary pump)
Max. Working pressure: 15Mpa (reciprocating pump)
Max. Working pressure: 25Mpa (valve)
PH value: 0-14
Linear speed: 0-20M/S (rotary pump)
Linear speed: 0-2M/S (reciprocating pump)
Linear speed: 0-2M/S (valve)
Cross Section: ≥ 1/8" ~ ≤ 3" (3X3-75X75mm)
Density: 1.35 ~ 1.45g/cc

Carbon fiber Packing impregnated PTFE
Item No.: JSP-CB20

Features
Carbonized fiber packing is a particular flexible combination of high
Quality carbon yarns and PTFE-yarns, diagonally braided with special
PTFE compound and impregnated with running-in lubricant.
Operating range

Pressure:
P(pumps) = 25 bar,
P(mixers, agitators, kneaders, filters) = 25 bar
Sliding velocity:
Vg(pumps) = 20 m/s (pumps)
Vg(mixers, agitators, kneaders, filters) = 2 m/s
Temperature: T = -100 +280 ° C
Chemical resistance: PH = 0 14
Resistant to alkalis, solvents, alcohols, ester-ketones, oils, acids, hot
Water, brine, ammoniac.

Graphite packing with carbon fiber corner
Item No.: JSP-CB30

Graphite packing with carbon fiber corner is braided packing made from expanded graphite, with reinforced
Corners made of carbon fiber, reinforced with textile fibers. This
Packing solution is elastic, extrusion resistant packing for applications
With high-temperature/high-pressure. Particularly appropriate for power
Plants and chemical applications.